Behavior of Shallow Strip Footing on Twin Voids

This paper numerically examines the bearing capacity and failure mechanism of a shallow strip foundation constructed above twin voids. The voids may refer to caves, caverns, underground aqueduct or tunnels due to water seepage, chemical reaction or deliberately excavated in soil deposit. The ability of numerical model to accurately predict the system behavior is evaluated by performing verification analyses on existing researches. Subsequently, a parametric study carried out to reveal the influence of size of footing/voids and their location (i.e. depth, spacing, eccentricity) on the bearing capacity of footing. To clarify the failure mechanism, the distribution of shear strain in the soil for different scenarios is assessed. The parametric study provided a new framework to determine the bearing capacity and the mode of failure for footings on voids. Based on the results, a criterion can be issued to avoid collapse of footing/voids regarding the shape, location and size of voids. The results can also be used to design construction of a footing on existing voids while the acquired failure mechanisms can be appointed to develop analytical solutions for this problem. Results demonstrated that a critical depth for voids and a critical distance between them exist where the influence on the ultimate bearing capacity of footing disappears.     

Late Cretaceous–Early Paleogene tectonic events at Farafra-Abu Minqar Stretch,Western Desert,Egypt: results from calcareous plankton

This work depends on integrated high-resolution calcareous plankton nannofossil and foraminiferal biostratigraphic analyses for three Upper Cretaceous-Lower Paleogene successions at Farafra-Abu Minqar area, Western Desert, Egypt. These sections are distributed in a north-south geologic profile as follows: El Aqabat, North Gunna, and Abu Minqar. Lithostratigraphically, four formations are recorded in the study area, namely, Khoman (at base), Dakhla, Tarawan, and Esna (at top). In the north at El Aqabat section, Khoman Formation (carbonate facies) is only represented which changes partially toward the south to Dakhla Formation (siliciclastic facies). In the extreme south at Abu Minqar section, it changes completely into siliciclastic facies of Dakhla Formation. Biostratigraphically, seven calcareous nannofossil and eleven planktonic foraminiferal zones represent the Late Cretaceous-Early Paleogene are identified. Based on the occurrence or missing of these zones accompanied with the field criteria resulted in detecting four tectonic events. These tectonic events took place at the Cretaceous/Paleogene (K/Pg), the Danian/Selandian (D/S), the Selandian/Thanetian (S/T), and the Paleocene/Eocene (P/E) boundaries. These tectonic events are related to the impact of the Syrian Arc System. Four sequence boundaries (SB1, SB2, SB3, and SB4) are defined in the Late Cretaceous-Early Paleogene sequence in the Farafra-Abu Minqar area.     

Analysis of physical factors of climate and bioclimate and their effects on almonds production to increase the economy in Hebron area of Palestine

For the 1993–2009 period, we analyzed the relationship between almond yield and three climatic variables (mean annual temperature, soil water reserve, and precipitation), and four bioclimatic variables (annual ombrothermic index, water deficit, simple continentality index, and compensated thermicity index), for one major Hebron crop (soft and hard almonds). Moreover, we obtained data almond production from the Palestinian Central Bureau of Statistics, while the climate data from the Palestinian meteorological station during the study period from 1993 to 2009, and analysis is it by using bioclimatic classification of the Earth of Salvador Rivas-Martinez to study the relationship between the almond yield and climate and bioclimate factors (variables). The climatic and bioclimate variables of greatest importance to almond were used to develop regressions analysis relating yield to climatic conditions. Hebron was positively affected by annual ombrothermic index, simple continentality index, precipitation, water soil reserve, and mean annual temperature, but negatively affected by water deficit, with a large proportion of the variance explained by axis F1 (72.48%), F2 (22.38%), and axes F1and F2 (94. 86%). However, in order to produce a high amount of almonds and quality, it can be grown in the regions of the mesomediterranean region, with the value of annual ombrothemic index more than 3, compensated thermicity index between 220/220 to 350/350, simple continentality index between 14 and 20, and in areas where the average annual temperature is between 15 and 20 °C.     

Provenance,weathering, and paleoenvironment of the Upper Cretaceous Duwi black shales,Aswan Governorate,Egypt

The mineralogy and geochemistry of the Upper Cretaceous Duwi black shales of Nile Valley district, Aswan Governorate, Egypt, have been investigated to identify the source rock characteristics, paleoweathering, and paleoenvironment of the source area. The Duwi Formation consists mainly of phosphorite and black shales and is subdivided into three members. The lower and upper members composed mainly of phosphorite beds intercalated with thin lenses of gray shales, while the middle member is mainly composed of gray shale, cracked, and filled with gypsum. Mineralogically, the Duwi black shales consist mainly of smectite and kaolinite. The non-clay minerals are dominated by quartz, calcite, phosphate, dolomite, feldspar, with little gypsum, anhydrite, iron oxides, and pyrite. Based on the CIA, PIA, and CIW values (average?=?84, 94, 95, respectively), it can be concluded that the litho-components of the studied shales were subjected to intense chemical weathering and reflect warm/humid climatic conditions in the depositional basin. The provenance discrimination diagram indicates that the nature of the source rocks probably was mainly intermediate and mafic igneous sources with subordinate recycled sedimentary rocks (Nubia Formation). Geochemical characteristics indicate that the Duwi black shales in Nile Valley district were deposited under anoxic reducing marine environments.     

Selecting Equivalent Strength for Intact Rocks in Heterogeneous Rock Masses

Many surface and underground structures are constructed in heterogeneous rock formations. These formations have a combination of weak and strong rock layers. Due to the alternation of the weak and strong layers, selecting the equivalent and appropriate geomechanical parameters for these formations is challenging. One of these problems is choosing the equivalent strength (i.e., uniaxial compressive strength) of intact rock for a group of rocks. Based on the volume of weak and strong parts and their strength, the equivalent strength of heterogeneous rocks changes. Marinos and Hoek (Bull Eng Geol Environ 60(2):85–92, 2001) presented the “weighted average method” for defining the uniaxial compressive strength (UCS) of heterogeneous rock masses based on the volume of weak and strong parts. Laubscher (1977) used the volume ratio of the strength of a weak part to a strong part (UCS weak/UCS strong) to determine the equivalent strength. In this study, the two methods are compared and their validity is evaluated by experimental data and numerical analyses. The geomechanical parameters of two heterogeneous formations (Aghajari and Lahbari) in the west of Iran were estimated using these methods. The results of the present study obtained through numerical analyses using particle flow code are compared with those of previous studies and discussed. Laboratory and numerical results show UCS decrease and approach to weak strength with an increasing in volume of weak part. When strength ratio of strong to weak rock increase, equivalent strength decrease more severely. The findings show that Laubscher’s method gives more appropriate results than the weighted average method.     

Life-cycle cost and sustainability analysis of light-frame wood residential communities exposed to tornados

Natural Hazards - Tornadoes pose a significant threat to residential communities, causing enormous physical damage and losses to their social fabric. The dominant type of single-family residential...     

The concept of ecological succession applied to phytoplankton over four consecutive years in five ponds featuring a salinity gradient

The distribution of phytoplankton abundance, biomass and species composition coupled with environmental factors and metazooplankton was studied relatively intensively and over a period of four consecutive years in five ponds featuring a gradient of increasing salinity from near to that of sea water to a nine-fold concentration from 2000 to 2003. The results indicate that the physical characteristics of the water (temperature and salinity) were quite similar over the years. Nutrients, which were concentrated in pond A1, decreased with increases in salt concentration. The composition of the phytoplankton community showed strong seasonality. Diatoms dominated in the first ponds A1, A16 and C2-1, followed by dinoflagellates. Chlorophyceae dominated the phytoplankton community in the hypersaline ponds M2 and TS. Cyanobacteriae were relatively abundant in ponds M2 and TS. The highest phytoplankton density and biomass were found in the ponds with the highest salinity due to the proliferation of Dunaliella salina (Chlorophyta: Volvocales). The inter-annual study of phytoplankton succession in the Sfax solar salterns showed slight differences among the years of study due to the stability of the environmental conditions. Phytoplankton communities were permanently primitive, stage 1 – structured as they failed to build complexity because of salt stress which operates for longer and above any other variables. This reduced frequency of disturbance to the existing course of regulation, allowed the community to “mature” from its “primitive” state, rather than experience frequent structural setbacks.     

Present state of geodynamic properties of Kalabsha area, nortwest of Aswan Lake, Egypt

Aswan Lake is the second largest man-made lake in the world. Its filling started 1964 and reached the maximum water level in 1978. An earthquake of magnitude 5.5 took place in 1981 along the most active fault near the lake (Kalabsha fault). This earthquake was follwed by a tremendous number of smaller events that continue till now.Seismicity and the underground water table around the lake are monitored continuously through a radio-telemetered network. A local geodetic network was established around parts of the active faults in the northwestern part of the High Dam Lake, for monitoring vertical and lateral movements. The Kalabsha local geodetic network (the first one) was established around an active part of the Kalabsha fault in 1983. Precise geodetic measurements have benn carried out twice a year since 1984.On the basis of the repeated geodetic measurements, seismicity of the area and geophysical as well as geological data, the present state of the geodynamical properties of the Kalabsha area is studied.Remarkable horizontal movements were detected; they are correlated with the seismicity of the area and are attributed to the differential loading by the lake. The Kalabsha fault is a right-lateral strike-slip motion on an E-W plane. The magnitude of the movements detected along the fault is variable for the different epochs of measurements and is correlated with both seismicity and water loading in the lake.     

Analysis of kinematic seismic response of tapered piles

In the present work, a two-phase analysis is used to assess the lateral movement of a tapered pile due to kinematic seismic loading resulted from earthquakes. First, the free-field horizontal displacement of the ground due to earthquake is estimated using available theory of wave propagation. Second, these estimated soil movements are imposed on the taper pile in a closed-form solution to compute the pile response. The governing differential equation for an arbitrary pile segment is obtained, which includes the free-field horizontal movement estimated from the first phase. The equation is solved explicitly to obtain the horizontal deflection. Parametric studies show that tapered piles tend to be more flexible than uniform piles of the same volume and length under earthquake loading, which is soundly interesting.